Your cart

Your cart is empty

Shop our popular collections

J Cardigan

The Juniper Cardigan

A step-by-step guide to knitting the candy stripe JUNIPER CARDIGAN

Ever gotten halfway through a project and thought “Hang on, am I even doing this right?” We have 🙋‍♀️


That’s why we’ve created these step-by-step guides to walk you through the knitting process. 


Even if you've never knitted before, we'll take you from zero to knitting hero in no time 🦸‍♀️


THE JUNIPER CARDIGAN IS A DOPAMINE INDUCING, RAINBOW, CANDY STRIPE BEAUTY. SHE’S A GORGEOUS CROPPED STYLE AND SHE’S PERFECT FOR BEGINNER KNITTERS.

When it comes to knitting, practice makes perfect 🏆

Before we get started on the pattern we suggest you spend a bit of time learning the basic stitches you’ll need to complete your masterpiece. 


To make the Juniper Cardigan, you'll want to be confident with the knit stitch and its friend the purl stitch before we start. We put the knit and purl stitches together to make a rib stitch and a stockinette stitch. You'll also want to get a hang of tying a slip knot and casting on your stitches which is the first step in any knitting project. 


You can use the yarn that came in your kit to practice with. Once you've got these mastered you'll find the pattern a cinch! 

Total beginner? 👩‍🏫 


For a more comprehensive lesson on the basics of knitting visit our Learn How To Knit page. 


Onto the Cardigan!

⚡️What you'll need

Your kit comes with everything you'll need to make your masterpiece. In your kit you'll find;

  • 12mm needles
  • 8-13 balls Cardigang Chunky Acrylic yarn in 4 colors
  • A darning needle
  • Made by me tag

You also want to have a pair of scissors handy. 

📏 Sizing and measurements

You can make your Junier Cardigan in six sizes. 


SIZE MEASUREMENTS
(laying flat)
 
1 (AUS 6-8) (USA 2-4) 54cm wide x 50cm high
2 (AUS 10-12) (USA 6-8) 59cm wide x 53cm high
3 (AUS 14-16) (USA 10-12) 64cm wide x 57cm high 
4 (AUS18-20) (USA 14-16) 69cm wide x 60cm high
5 (AUS22-24) (USA 18-20) 74cm wide x 62cm high
6 (AUS 26-28) (USA 22-24) 79cm wide x 64cm high

Your pattern is read like this; 1 (2, 3, 4, 5, 6). Make sure you're following the correct instructions for your size. 

🥣 Test your tension

Before you start your project, make sure your tension (how tightly or loosely your knitting is) is juuuust right. We do this by knitting a “tension swatch”. It's a bit like goldilocks, if the tension is too tight, your piece will be too small, and if it's too loose it may not hold its shape and might be too big. 


Gauge: If done correctly, your 10x10cm knitted swatch should be 8 stitches wide and 12.5 rows high when knitted in stockinette stitch on your 12mm needles. 


To test this, jump on your needles - use the yarn and needles that came in your kit. Cast on around 12 stitches, then knit in stockinette stitch (knit all stitches in your first row, purl all stitches in the next - repeat) for around 14 rows. Then measure a 10x10cm square and count your stitches and rows within that space to make sure you're knitting at the correct tension. 


If you've got more stitches or rows than the instructions say you should have, your knitting is a little too tight, and if you've got less your knitting is too loose. Adjust your tension by holding the yarn a little more tightly/loosely as you knit.


💡 We know knitting a tension swatch can seem like a bit of a drain, but it's really important because the difference of a few millimetres in your tension can lead to a finished piece this is quite different in size to what you intended. 


GET READY TO SWITCH OFF. STITCH ON. Let's knit up a storm 🧶

Remember learning a new skill can be a little challenging at first, and you’re bound to find yourself making some mistakes along the way. But as with learning anything, your brain and your hands slowly start to get the hang of it, muscle memory is created, and soon the thing you found tricky/daunting/scary is like second nature! 💪


THE BACK

We start with the back piece which we knit flat from the bottom rib up to the shoulders. This is the biggest piece of your cardigan and once done it will look like a big rectangle. 

Step 1:

Using your 12mm needles cast on the correct number of stitches.


💭 Your stitches will run down onto the plastic tube connecting your needles. That's totally fine!


Hot tip: your piece will 'grow' as you knit so don't be alarmed if it looks like you're knitting a baby's cardi to start with!

Step 2:

We’ll knit 5 rows of 1x1 rib stitch. To create a rib pattern, we knit 1 stitch, then purl the next, then knit the next, then purl the next and repeat.


🧶 Make sure you’re moving your yarn tail from the back to the front of your work between each stitch (bring the yarn in through the middle of the needles) to ensure the rib is executed correctly.


💭 One of the things we found the hardest when we were learning to knit was keeping track of our rows. Before we were able to easily identify a row of stitches we used a pen and paper to keep track. That's why we've included handy circles in our patterns - you can tick them off as you go. The dashed circles are for the larger sizes.

Step 3:

We're going to start knitting in stockinette stitch next. This is where we knit all the stitches in one row, then purl all stitches in the next - we repeat this pattern as instructed.

Step 4-9:

Time for our first colour change! We always change colours at the end of a row. Watch the video below to see how it's done.


📹 Watch How To Change Colours


Continue knitting in stockinette stitch and change colours are instructed. 

Step 10:

Cast off your stitches! 


When you've got just one stitch left on your right needle, simply cut your yarn from the ball (leaving about 20cm) and thread it back through your last stitch to secure it.


🔥 NICE WORK! THE BIGGEST PIECE OF YOUR cardigan is done!

 

DID SOMEBODY SAY WINE TIME?! 🍷

THE FRONT PIECES

FRONT PIECES

The good news! The front panels are knitted using the same techniques as the back so these will be a cinch now! 😎

THE SLEEVES

We knit our sleeves from the top down, meaning we're going to start knitting in stockinette stitch. 


Our cardi rocks a different stripe combo for each sleeve so you'll find 2 separate lots of instructions in your pattern - one for each sleeve. 

Step 1:

Cast on the required number of stitches using your 12mm needles.

Step 2-7:

Knit in stockinette and change colours as advised. 

Step 8:

📉 Time to decrease some stitches! To get the shape in our sleeves, we're going to decrease some stitches in the row before we knit the cuff. We do this by knitting two stitches together. 


📹 Watch How To Knit Two Stitches Together

Step 4:

We knit the cuffs in a 1x1 rib stitch so they have a nice stretch. 

Step 5:

Cast off your stitches and then follow the instructions for sleeve 2.


Hot tip - when you cast off don't do it too tightly or you'll have a very tight hole for your wrist to squeeze through! 

SEWING IT TOGETHER

We're SO CLOSE! I can see the finish line 🎢🙌


Now it’s time to get to work with the darning needle to sew your masterpiece together. We lay our pieces flat and sew them together one by one.

Step 1:

Lay your front and back pieces on a flat surface, the right sides facing you. 

Step 2:

Then sew the cast-off edges of the front panels and the back panel together, leaving the gap in the middle for the open front of the cardi. It's best if you work from the edge of the piece and sew inwards. 


We use a technique called the invisible seam technique which gives us a nice neat join. In the video below, we cover two variations of the technique - you can pick which you prefer! 


📹 Watch How To Sew Cast Off Edges Together

Step 3:

Time to attach the sleeves to the body. Make sure the middle of your sleeve is lined up with the shoulder seam. This will ensure the seam of your sleeve is right under your armpit, not half way around your arm! Once you've made sure it's all lined up, sew the sleeves to the shoulders. 


For this step and the next, we use a technique called mattress stitch. This technique is used when joining pieces vertically and it gives us a nice neat (almost) invisible join. It's also a great technique to hide loose or sloppy edges! 😎 


You work this seam through the “bars” of stockinette stitch. 


📹 Watch How To Sew A Vertical Invisible Seam


💭 If you're anything like us you might find seaming a bit of a pain and hard to make super neat. It's a common beginner challenge! The main principle with seaming is no matter what seaming method you use, be sure you are entering into the same place on each stitch along the seam. This consistency makes it harder to see the seam.

Step 4:

Fold your cardi in half long ways with the wrong sides facing each other, we're going to sew the sides together using the same mattress stitch technique. 


Start either at the cuff of the sleeve or the rib of the waist and work your way to the armpit and then around to the other end. 

FINISHING

The last thing we do for every piece is weave in the ends. That’s basically just tidying up the piece so all loose ends are trimmed down and tucked into the inside of your work. You use your darning need and weave those ends into the seams so they are nicely hidden away. 

BLOCKING (OPTIONAL)

The final step in finishing a knitted piece is to block it. This step is optional and not all beginner knitters will block their work (we didn't! 🤣) but it can improve the overall shape and finish of your piece. 


Blocking your knitting is a process where you wet your piece to set the finished size and even out the stitches.


You can choose to block your work before you seam it together, or after. If you block before seaming together you might get a better result with your seaming because the stitches will be more lined up.


Step 1

Soak your knit in cool water. You only need to let your piece sit in the water for a few minutes and make sure the full piece is completely wet. 


Step 2

Remove your knit from the water and dry it off by rolling it in a towel. You want to get us much of the moisture out of the knit as possible at this point but be gentle! You don't want to stretch the knit.


Step 3

Transfer your damp knit to a flat surface to block it on. If you've got a blocking mat - great! otherwise a towel will work. The surface needs to be somewhere where your knit can lie flat and can stay there until it fully dries so that the shape sets properly. Make sure it's not a surface that can be easily damaged by having something wet sitting on it! 


Step 4

Arrange your piece so the right side is facing up and the shape is as you'd like it. If you've got a measuring tape you can measure and adjust the piece so it's the correct size. 


Step 5

Allow the knit to air dry - this can take a few days. You can also use a hair dryer to speed up the process, just use a light heat and don't concentrate the air in one spot. 


D.O.N.E! You've finished your cardigan, well done! Epic work 🤩 If this was your first-ever knitting project or one of many, we hope you had a blast click-clacking and making your masterpiece 💥❤️

In a bind and need a little more help?

Email us at stitchup@cardigang.com.au and we'll be able to help! Whether you're just starting out, or you've got a specific question or problem (dropped a stitch, no stress!), we're here to get you out of a bind.

Previous post
Next post
Back to Knit Kits