A step-by-step guide to knitting the gorgeous Priya Cardigan.  

Ever gotten halfway through a project and thought “Hang on, am I even doing this right?” We have 🙋‍♀️

That’s why we’ve created these step-by-step guides to walk you through the knitting process. 

Even if you've never knitted before, we'll take you from zero to knitting hero in no time 🦸‍♀️

PRACTICE MAKES PERFECT

Before we get started on the pattern we suggest you spend a bit of time learning the basic stitches you’ll need to complete your masterpiece. The Priya Cardigan is made using a combination of knit and purl stitches. We put these together to make a 1x1 rib stitch and a stockinette stitch. You'll want to be confident with the knit and purl stitches before you start 🧶 You'll also want to get a hang of tying a slip knot and casting on your stitches which is the first step in any knitting project. 

📹  Watch How To Tie A Slip Knot

📹  Watch How To Cast On

📹  Watch How To Knit Stitch

📹  Watch How To Purl Stitch

You can use the yarn that came in your kit to practice with. Once you've got these mastered you'll find the pattern a cinch! 

👩‍🏫 For a more comprehensive lesson on the basics of knitting visit our Learn How To Knit page. Or jump to our YouTube page and do some exploring. 

TEST YOUR TENSION

First thing's first. Before you start your project, make sure your tension (how tightly or loosely your knitting is) is juuuust right 🥣 We do this by knitting a “tension swatch”. It's a bit like goldilocks, if the tension is too tight, your piece will be too small, and if it's too loose it may not hold its shape and might be too big. 

If done correctly, your 10x10cm knitted swatch should be 7 stitches wide and 9 rows high. 

To test this, jump on your needles, cast on around 12 stitches, then knit in stockinette stitch (row 1 knit, row 2 purl) for around 10 rows. Then measure a 10x10cm square and count your stitches and rows within that space to make sure you're knitting at the correct tension. 

💡 We know knitting a tension swatch can seem like a bit of a drain, but it's really important because the difference of a few millimetres in your tension can lead to a finished piece this is quite different in size to what you intended. 

ONTO THE CARDI!

Priya's the dipped sleeve cardi you didn't know you needed. She's a relaxed, oversized fit with an open front and rib detail. The dip sleeve is the perfect accent making Priya the knit you'll want to wear every day.

SIZING

You can knit the Priya in size 1/Small, 2/Medium or 3/Large. Each piece of the cardigan is knitted flat, and at the end, we'll stitch each panel together to make your cozy masterpiece. Your pattern is read like this: 1 (2, 3).

WHAT YOU’LL NEED

Your kit comes with everything you need to knit your masterpiece. 

• 10mm circular needles - we use these for the rib at the bottom, on the cuffs and for the band around the front of the cardigan

• 15mm straight needles - these are to knit the body of your cardigan

• 4-5 balls of Chunky Merino in colour 1
• 1 ball of Chunky Merino in colour 2

• Darning needle - this is used to sew your masterpiece together and weave in loose ends

USING YOUR PATTERN

One of the things we found the hardest when we were learning to knit was keeping track of our rows. Before we were able to easily identify a row of stitches we used a pen and paper to keep track. That's why we've included handy circles in our patterns - you can tick them off as you go. The dashed circles are for the larger sizes.

BACK

We start with the back panel, it’s the simplest piece of the knit and will give you confidence as you move on to other pieces. We knit from the bottom up, starting at the rib and going up to the shoulders. 

Step 1:

Cast on the required number of stitches using your 10mm circular needles and colour 1 yarn.

Step 2:

Once you've cast on the right number of stitches you move on to the rib. We knit the rib following the instructions in your pattern. To create a rib we knit 1 stitch, then purl the next. Make sure you’re moving your yarn tail from the back to the front of our stitch to ensure the stitch is executed correctly. 

📹 Watch How To Do A Rib Stitch

Step 3:

Next, we move onto using our 15mm straight needles and into stockinette stitch. 

To switch to a different size needle we just hold the new needle (in this case the 15mm straight needle) in our right hand and knit onto the stitch on your 10mm needle in your left hand. Simple! 

We knit the required number of rows of stockinette stitch. 

Step 4: 

Time to cast off our stitches to finish the back piece. Well done! 

📹 Watch How To Cast Off

FRONT

Now onto the front panels. We are going to knit two front panels; your left and right. They are identical so no need to worry about which is which. 

The front panels are knitted up in the same way as the back, starting at the rib and working up through stockinette stitch.

Knit, knit, knit, knit... 

SLEEVES

Onto the sleeves. You'll do two of theses too 😎🧶

We start at the top of the sleeve and knit down to the cuff. We knit this piece flat just like the front and back pieces.

Step 1: 

Using your 15mm straight needles and colour 1, cast on the correct number of stitches.

Step 2: 

We're going to knit in stockinette stitch for the allocated number of rows. This should be a cinch by now! 💪

Step 3: 

Next we're going to change our yarn colour to colour 2. We always change colours at the end of a row. Watch the video below to see how. 

📹 Watch How To Change Colours 

STEP 4:

To get the shape in our sleeve, we're going to decrease some stitches before we knit the cuff. You'll purl two stitches together along the length of the row. At the end, you'll have 18, 18, 19 stitches on your needle.

📹 Watch How To Purl Two Stitches Together

Step 5:

Once that’s done you'll swap to your 10mm needles to start your rib stitch for the allocated number of rows. 

Step 6:

Cast off your stitches. When you cast off make sure it’s not too tight otherwise you’ll have a really tight wrist hole!

SEWING IT TOGETHER

Now it’s time to get to work with the darning needle to sew your masterpiece together. We lay our pieces flat and sew them together one by one.

📹 Watch How To Sew Your Knit Together

Step 1:

Lay your front and back pieces on a flat surface, the right sides facing you. 

Step 2:

Sew the shoulder panels together using the invisible seam technique, and leaving the hole in the middle for the open front of the cardi.

Step 3:

Time to attach the sleeves to the body. Make sure the middle of your sleeve is lined up with the shoulder seam. This will ensure the seam of your sleeve is right under your armpit, not half way around your arm! Once you've made sure it's all lined up, sew the sleeves to the shoulders. 

Step 4:

Fold your cardi in half long ways with the wrong sides facing each other, we're going to sew it together using a Mattress Stitch, from the arm cuff all the way up the arm to the arm pit, then down the side seam to the bottom of your jumper. And then repeat this on the other side.  

💭 We suggest trying to match the colour yarn you use to the jumper to keep it as invisible as possible. It's normal for the wool to get a bit shabby as you go, so we recommend using a few pieces and tying them together underneath as you go!

THE NECKLINE RIB

We're SO CLOSE! I can see the finish line 🎢🙌

The last part is to finish off the neckline with a 1x1 rib stitch - you’ll be pretty good at this now!

Using your 10mm circular needles, pick up a stitch for every row along the raw neckline. You would have approximately 118 (126, 134) stitches on your needle in equal spacing around the neckline. It will be a bit of a squishy fit on the needle but that's okay! 

📹 Watch How To Pick Up Stitches

FINISHING

The last thing we do for every piece is weave in the ends. That’s basically just tidying up the piece so all loose ends are trimmed down and tucked into the back of your work. You use the seams here to weave those ends in so they are nicely hidden away.